Your browser does not support the video element
US $2.11 - 28.08
US $2.93 - 39.00 -28%
V***k 30 Jan 2020
It came in less than a month, shines with blue, not pure cold white. Disfigured. But it shines brightly. I'll try to mount in the kitchen, sfotkaya as shining and add feedback. the seller has done its part well. Seller recommend. Be careful cold white gives blue.
V***v 03 Mar 2020
In Omsk for a month. It didn't hurt. It came under another common track, the track was re-branded 3 times. 5 m 5050 300 lights eats 2.8A. 24 watts.
AliExpress Shopper 15 Jan 2020
Ok. Shipped fast. Match description
For lighting canopy in the yard is enough. Size canopy 12х14м
Yuan m/m/m. In the few W SMPS power allows you to?
The interior lights car it can install?
Yes with stabilizers
Господа, у кого сколько прослужили диоды? спасибо за раннее
XS only put
The aluminum profile should be glued to dissipate heat?
Stand on the aluminum плинтусе 30х30, almost not heated, temperature skirting just over 40 degrees. The Light Is very bright. Without Heat sink temperature is over 60 degree.
Which tape width?
which need power meter 1st transformer tape.
As I wrote in his review, one section (three LEDs) consumes the 12C 50мА. THE meter 40 sections. Ideally we would have 2A per meter. But because of the voltage drop across the hardcopy explorer consumption will be significantly less (no more than 1.5A). If you burn all the tape (5 m) then get the consumption about 4A (for all of the same falling on print Explorer). Therefore will be smaller and illumination. So if you do not want to brightness fall by the end of the tape, not need to record all the tape at one end.
Can I use IP65 or 67 version for kitchen? I want to stick it to MDF. Can heat be a problem for leds?
Need To use aluminum profile for LED strip
about how much shipping? интересен краснодарский edge. suddenly заказывал who
Deliver SDEK quickly.
Good evening, how to load the switch? He switched off after 5 minutes of :( with LED ribbon SMD 5054 long 4 meters, power supply 76 W. Touch Button
Put honest Watts. AND normal button.
The feeder that intensity would need? 2A by meter okay?
2,9Amper 5 meter